"Basic Install Kit" for In-Line 4 Cylinder Vanagon Engine Conversion
Call 207.833.0009 or email sales(at)foreignautosupply(dot)com to place your order.
Why be stuck having to settle for antiquatedly designed Vanagon diesel components to install an in line conversion into a Vanagon?
FASTT's Basic Engine Converion kit eliminates the need of using any hard to find original Vanagon diesel components. All parts are produced stateside using only the finest materials and machining processes available by FAS, and incorporate our highly successful proprietary hydraulic engine mount bar system.
"Value through calculated simplicity"
Based on a 2000+ VW 4 Cylinder Engines- AEG, AVH, BEV 8 Valve Engine Codes, as well as TDI, Mechanical Diesel, and Pumpe Duse Diesels
1.8T Engines- Intake manifold will need modification to fit under the deck lid
Basic Install Kit will also fit; 2LR, ABA, or earlier equivalent codes.
**Basic Install Kit Parts were designed around the Vanagon Waterboxer gearbox/bellhousing, Using a stock Vanagon (gas) clutch kit**
(Please contact FAS to verify your engine/specifics will work with out components)
If using our basic kit, you will need to come up with all the additional solutions for the following:
-Full coolant system configuration
-Full exhaust system configuration
-Full electronics, harness,ecu, tuning etc.,correctly sized MAF housing,etc.,
-Full intake system configuration, including air box and intercooler systems, plumbing etc.,
-Electronic throttle pedal system
-Tach converter system as well as factory gauge interface
-Cruise control if you want it hooked up
We do not provide a complete item check list of other components needed or any technical support on the "basic kits" outside of the very user friendly instructions/specs for the components for the basic kit we would be providing you in that kit.
Standard Transmission Kit Includes-
Adaptor Pate (w/ hardware)
Adaptor Plate Dust Shield (w/ hardware)
Bell Housing Gasket
Diesel Style Input Shaft
Oil Pan and Oil Pick Up Adaptor (w/ o-rings) **OE cast oil pan & diesel pick up tube & pump provided for some earlier conversions
Hydraulic Engine Cradle and Mount Kit (powder coated)**
2 Engine Mounts
2 Hydraulic Mounts
2 Cradle Spacer Blocks
Naturally Aspirated Gas, Standard/Syncro/Automatic (please specify when ordering)
Automatic Transmission Includes-
Adaptor Plate (w/ hardware)
Adaptor Plate Dust Shield (w/ Hardware)
Flexplate (w/ hardware)
Oil Pan & Pick Up Adaptor (w/ o-ring)
Hydraulic Cradle and Mount Kit
Turbo Drain Kit Add-on: $189
**FITS VNT-15, OR VNT-17 TURBOS**