Hydraulic Engine Cradle & Mount System, In-Line 4 Cylinder Conversion- MK3 Engines ONLY
Contact us for pricing
Call 207.833.0009 or email sales(at)foreignautosupply(dot)com to place your order.
Probably our proudest design to date…Eliminate vibration, improve clearance and longevity with our rugged proprietary Engine Cradle and Hydraulic Mount Set-Up.
Some in the industry have stated that no in-line Vanagon swap could be as smooth, reliable, or vibration free as a boxer engine, especially when mounted at 50 degrees…They haven’t tried our “Better Mousetrap” design.
The problem with VW’s 30 year old, antiquated diesel cradle bar design is its north to south mounting orientation…VW had it right on the earlier Air-Cooled & Wasserboxers by running east to west with the cradle bar which correctly added frame rail to frame rail strength and rigidity.
The additional Vanagon diesel design flaws are obvious…mounting an engine between two engine cradles @ 50 degrees with mounts that have no provision for side to side engine torque being applied is doomed from the start- and we did not need a resident engineer to tell us this.
Like the boxer and earlier air-cooled designs we stole a page from that book and designed our In-Line cradle to mount east to west critically incorporating side to side frame rail/bumper strength and rigidity to greatly reduce vibration and resonance.
Several test vehicles of both Gas & Diesel In-Lines have logged over 2 million miles with our Hydraulic Cradle Bar System, which continues to perform perfectly.
***To be used with a gas bell housing, and FASTT Adaptor Plate. Not guaranteed to fit using a diesel bellhousing, or another adaptor plate***
**GEN.3 DIESEL & GAS ONLY**
- 1992-'99 Diesel & Gas ONLY
- Engine Cradle
- Left Engine Mount
- Right Engine Mount
- 2 Hydraulic Mounts
- 2 frame Blocks & Hardware
*When ordering, you must include year of engine and engine code, so we can supply you with the correct application in regards to left and right engine mounts. Please, include transmission information as well.*
Made in USA
Replacement Mounts Can Be Purchased HERE
"...Noise level is definitely reduced and I was even able to pass through the dreaded 3,000 RPM “node” on up to 4-5,000 RPM. It felt solid & unruffled at that engine speed...
In summary, I am impressed by the improvement in drivability and decrease in annoying vibrations the FAS Hydraulic Motor Mount makes and I believe it was a worthwhile investment for folks like me who have no plan for being without their Vanagon.
Congratulations to the FAS Team for making a significant improvement in the Vanagon"
-Wes, Tiico Conversion
"Just wanted to report on my cradle swap/install. It’s in and a short drive home was pretty damn impressive! Noise and vibrations reduced by 70%.
The most surprising part is how much more responsive the engine is in power to the drive train.
I’m sure you don’t get a lot of DYI guys but even a hack like me was able to ferret out the assembly."
-Steve, Tiico Conversion
"Since buying the van in 2003, we've driven it 149,000 miles through thirty seven states and six Canadian provinces, from Southern California to
Nova Scotia and from Alaska and the Yukon to Florida, and that Tiico buzz has accompanied us all the way. Thanks to the creative energy of FAS,
the buzz is gone, the exhaust sounds great, the sound system has little competition, and we're happy as pigs in shit".
-Bob, Tiico Conversion